Filter
Top Products
English – 31
Maintenance
Checking the engine’s cooling air
intake
Clean the air intake grille in the engine cover behind the
driver’s seat.
Open the engine cover.
Check that the cooling intake is free from leaves, grass and
dirt.
Check the air duct, located on the inside of the engine cover,
ensure it is clean and does not rub against the cooling air
intake.
A blocked cooling intake will interfere with the cooling of the
engine, which can damage the engine.
Replacing the rear drive belt PR 17
and PF 21
Removal
1 Lift up the cutting unit
2 Remove the transmission cover.
3 Unhook the spring (A) from the screw (B).
4 Remove the hose holder in the middle and the belt guide
for the centre belt.
5 Pull off the centre belt from the engine's pulley and pull out
the rear section.
6 Remove the cooling fan, it is held in place by a nut.
7 Remove the belt from the hydrostatic transmission pulley.
!
WARNING! The cooling air intake rotates
when the engine is running. Mind your
fingers.
B
A