Husqvarna PAC IV-13.5R Lawn Mower User Manual


 
9
FIGURE 1 – Parts List (Items 63 - 99) (See Notes for Items Marked With “C” or “D”)
(REV 2-12-2007)
Diag
Loc.
Part
No.
Qty
Re
q
Description (* Denotes Metric Item)
Diag
Loc.
Part
No.
Qty
Req
Description (* Denotes Metric Item)
63 177025 1 Front Pointer Assy (# 54-59 & #89-92) 88 020762 2 Washer, Flat, 1/4" SAE
64 167911 1 Handle Bar Weldment 89 172137 1 Rope, 5/32" x 80" Long (Nylon)
65 139568 2 Grip, Handle Bar 90 162761 3 Clamp, Hose
66 177557 2 Knob, Handle, 3/8"-16 UNC 91 020136 1 Nut, Std. Hex, 3/8"-16
92 020786 1 Lockwasher, Split, 3/8"
67
502437501
1 Control Panel – Husq Gray
67 ------ --
Use of Item 67C or 67D (See Note C or D)
93
041160 2
Collar, Lock, 3/4
" Bore
67C 167800 1 Control Panel Weldment, PC Blue 94 020766 1 Washer, Flat, 1/2" SAE
67D 177909 1 Control Panel Weldment, PC Black
*68 197227 9 Capscrew, Hex Hd., M8 x 1.25 x 20mm 95 ------ --
Use Item 95C or 95D (See Note C or D)
69 020763 9 Washer, Flat, 5/16" SAE 95C ------ -- ----------
*70 139738 9 Locknut, Fiber, M8 x 1.25 95D 177923 1 Latch, Crank Handle, Zinc Plated
*71 177930 1 Cowl Weldment, PC Blue (Metric)
71
502437401
1 Cowl Weldment - Husq Orane
*72 139749 4 Capscrew, Hex Hd., M10 x 1.5 x 25mm 96 ------ --
Use Item 96C or 96D (See Note C or D)
96C ------ -- ----------
*73 173014 4 Washer, Flat, M10 96D 171710 1
Washer, Wave Spring, .28 ID
*74 139748 4 Locknut, Fiber, M10 x 1.5
97 ------ --
Use Item 97C or 97D (See Note C or D)
75
502437301
1 Cover, Rear Cowl, Husq Gray
75 167807 1 Cover, Rear Cowl, PC Black (See Note “E”) 97C ------ -- ----------
97D 161531 1
Washer, Fiber, .75x.265x.093” Thick
*76 167925 4 Capscrew, Flange Hd., M8 x 1.25 x 30mm
*77 139738 4 Locknut, Fiber, M8 x 1.25 98 ------ --
Use Item 98C or 98D (See Note C or D)
98C ------ -- ----------
78
502447801
1 Shield, RH – Husq Orange 98D 139761 1 Capscrew, Hex Hd., M6 x 1.00 x 20mm
78 167814 1 Shield, RH (See Note “E”)
*79 197227 3 Capscrew, Hex Hd., M8 x 1.25 x 20mm 99 ------ --
Use Item 99C or 99D (See Note C or D)
80 020785 3 Lockwasher, Split, 5/16" 99C ------ -- ----------
81 020763 3 Washer, Flat, 5/16" SAE 99D 139745 1 Locknut, Fiber, M6 x 1.00
82
502444701
1 Belt Guard (Standard) – Husq Orange
82
502444601
1 Belt Guard (Tall) – Husq Orange
167825 1 Belt Guard (Standard)
167969 1 Belt Guard (Tall) (5E,7.5E,14KM, 18-20H)
177002 1 Belt Guard (10Y Only)
177595 1 Belt Guard (14KCR)
*83 197227 5 Capscrew, Hex Hd., M8 x 1.25 x 20mm
*84 020785 5 Lockwasher, Split, M8
85 020763 5 Washer, Flat, 5/16" SAE
86 163988 1 Wrench, 1-1/16" Open End
*87 197170 1 Wing Bolt, M6 x 1.0 x 16mm
Notes:
C) These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).
D) These Items (Marked with a D) Effective Spring (Approx. February, 2000).
E) These Items Used Only On Drivematic Equipped Models Effective Spring (Approx. February) 2000. Eliminated from
Push Models – can be purchased separately for Push models Effective Spring 2000.