Filter
Top Products
Owner's Manual
NovoLette – Hand Lawnmower
40 cm model
The NovoLette lawnmower is a quality product which is manufactured with
great precision. It will give many years of good service if used and
maintained with reasonable care. It incorporates a friction free cutting
method which is suitable for well-kept lawns etc. NovoLette is easy to
handle and is quiet in use.
Follow the instructions to ensure safe and
correct use.
Safety
• For safe use, it is important that every person who uses the
lawnmower is acquainted with the instructions.
• Never allow children to use or play with the lawnmower.
• Before use, check the function of the mower and the tightness of the
nuts and screws.
• Check that the lawn is free from stones and other objects that could
cause personal injury or damage to the mower.
• For maximum safety, protective goggles and robust shoes with
nonslip soles should be worn.
• Never use the mower barefoot. Take care when mowing sloping
areas – mow diagonally if possible. Be careful when pulling the
mower backwards.
• Never mow near children or pets.
• Use the mower only in daylight.
• Avoid mowing when the lawn is wet and slippery.
• Take care when resetting and servicing the mower. Protective gloves
are recommended. Always use genuine spare parts.
• When the mower is not in use it should be stored out of the reach of
children. Remember that the cylinder rotates easily and the blades
are sharp; the mower can cause serious personal injury.
Fitting the handle. Figs 1 and 2
The handle is fitted using the accompanying lower nut and bolt. Two fixed
10 mm spanners are needed for tightening, or two adjustable spanners.
The handle is mounted on the mower as shown in Fig 2. Note the placing of
the handle clamp. Hold the handle vertical and insert the lower part on one
side into the wide slot so that the stud enters the side hole. Press it in and
insert the the other half of the handle in the same way.
40 cm:s
12 - 38 mm
36
Diametro 150 mm
10,3 kg / 0,07 m
3
9,1 kg
400 mm
Carter protezione Acciaio laminato Ruote Polipropilene Pignoni Poliammide con fibra di vetro
Telaio Tube in acciaio Impugnatura Tubi in acciaio con presa morbida epdm
Rivestimento Tutte le parti in acciaio sono verniciate a forno Raccogli-erba Accessorio
Peso E Cubatura con Imballo
Peso netto
Larghezza di taglio
Altezza di taglio, 4 poss.
N. di tagli / m
Rullo di taglio, 5 lame.
40 cm:s
12 - 38 mm
36
Diameter 150 mm
10,3 kg / 0,07 m
3
9,1 kg
400 mm
Skyddsplåt Stål Hjul Polypropylene Drev Polyamid med glasfiber Ram Dubbla stålrör Handtag
Stålrör med EPDM-handtag Ytbehandling Samtliga ståldetaljer pulverlackerade Uppsamlare
Tillbehör
Bruttovikt / volym, emballerad
Nettovikt
Klippbredd
Klipphöjd, 4 pos.
Antal klipp / m
Knivcylinder, 5 knivar
40 cm:s
12 - 38 mm
36
Diameter 150 mm
10,3 kg / 0,07 m
3
9,1 kg
400 mm
Tekniske data
Deksel Stål Hjul Polypropylene Drev Polyamid med glasfiber Ramme Doble stålrör
Håndtak Stålrör med EPDM-håndtag Finish Samtliga ståldetaljer pulverlakkert
Oppsamler Ekstrautstyr
Vekt / volum, emballert
Nettovekt
Klippebredde
Klippehøyder, 4 trinn
Antall klipp / m
Knivsylinder, 5 kniver
40 cm:s
12 - 38 mm
36
150 mm diameter
10,3 kg / 0,07 m
3
9,1 kg
400 mm
Tekniske data
Grenskærm Stål Hjul Polypropylene Drev Polyamid med glasfiber Ramme Dobbelt
stålrørkonstruktion Håndtag Stålrør med EPDM-håndtag Finish Alle ståldetaljer er
pulverlakerede
Opsamler Tillbehør
Bruttovægt / volumen (i karton)
Nettovægt
Klippebredde
Klipphøjde, 4 pos
Antal klip pr. m.
Knivcylinder, 5 knive
40 cm:s
12 - 38 mm
36
Halkaisija 150 mm
10,3 kg / 0,07 m
3
9,1 kg
400 mm
Tekniset tiedot
Suojakotelo Teräslevy Pyörät Polypropyleeni Hammasrattaat Polyamidi ja lasikuitu
Asia Kaksois-teräsputki Kahva Teräsputket EPDM-pehmusteella Pinnoitus Kaikki teräosat on
puuterimaalattu
Ruohonkerääjä Lisävaruste
Kuljetuspaino / - tilavuus
Nettopaino
Leikkuuleveys
Leikkuukorkeudet, 4 kpl
Leikkuita / m
Leikuusylinteri, 5 terää
Dati Tecnici
Tekniska data
1
2
3
6
5
4