Filter
Top Products
English-31
OPERATION
Running
Release the parking brake by moving the 1.
lever downward.
NOTE: The mower is equipped with an
operator presence system. When the engine
is running, any attempt by the operator to
leave the seat without rst setting the parking
brake will shut off the engine.
Move the steering controls to the neutral 2.
position (N).
8061-010
Released parking brake
8061-011
Cut height selection
WARNING!
Ensure that no one is near
mower when engaging blade
switch.
Select the cutting height by setting the 3.
cutting height pin into the desired hole.
Release foot pedal latch and lower deck to
set cutting height.
Make sure the work area is free from objects 4.
that could be thrown by the rotating blades.
Engage the mower deck by pulling out the 5.
blade switch.
Move throttle control to full throttle. 6.
The machine’s speed and direction are 7.
continuously variable using the two steering
controls. When both controls are in the
neutral position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves
in a straight line forward or backward
respectively.
In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation of
8061-002
Engage the mower deck and move throttle to full.