Filter
Top Products
34 – English
Engine
Cylinder volume, cu.in/cm
3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/ rpm
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication
system
Manufacturer
Carburetor type
Fuel capacity, US pint/litre
Oil pump capacity at
8 500 rpm, ml/min
Oil capacity, US pint/litre
Type of oil pump
Weight
Without bar and chain, Lbs/kg
Chain/bar
Standard bar length,
inches/cm
Recommended bar lengths,
inches/cm
Usable cutting length
inches/cm
Chain speed at max.
power, m/sec
Pitch, inch/mm
Thickness of drive link,
inch/mm
Number of teeth on drive
sprocket
3120XP
7,25/119
2,3/60
1,65/42
2 500
6,2/ 9 000
SEM
CD
Champion
RCJ 7Y
0,020/0,5
Walbro
WG 7
2,4/1,25
28-51
1,45/0,7
Automatic/Manual for
extra oil flow
22,9/10,4
24"/60
24-42"/60-107
23-42"/57-106
20,1
0,404"/ 10,26
0,063/1,6
7
TECHNICAL DATA
WARNING! This chain saw model is capable of
severe kickback that could result in serious injuries
to the user. Do not operate this saw unless you
have extraordinary cutting needs and experience
and specialized training for dealing with kickback.
Saws with significantly reduced kickback potential
are available. Always use the safest saw and cutting
equipment applicable to your cutting need.
!
Recommended original and replacement bar
and chain combinations
This Husqvarna saw model is in the ANSI category of saws above
3,8 cu. in. and is not
required
to comply with low kickback
performance requirements. However, for the Husqvarna chain saw
model 3120XP we recommend the following cutting equipment.
Guide bar Saw chain
Length Pitch Max nose
inch inch radius
24-42 0,404 ATL 1,65" Husqvarna H64 or Oregon 27
ATL is the Oregon designation of Armour Tip Large hard nose bar.
The combinations of powerhead, bar and chain have been
investigated in accordance with the vibration requirements of
ANSI B 175.1-1991.
´*32o¶50¨