Husqvarna 225R, 225RD, 227R, 227RD, 232R, 232RD, 235R Trimmer User Manual


 
18 English
Assembling the handlebars
(227R/RD, 232R/RD)
ASSEMBLY
Assembling the handlebars (235R)
Remove the screw at the
rear of the throttle handle.
Slide on the throttle handle
on the right-hand side of
the handlebars, (see the
diagram).
Align the hole in the
throttle handle for the
fixing screw with the hole
on the handlebars.
Refit the screw in the rear
of the throttle handle.
Fit the screw through the
throttle handle and the
handlebars and tighten.
Unscrew the bracket
components from the
handlebar bracket.
Position the handlebars as
shown. Fit the bracket
components and tighten the
handle lightly.
Fit the cabling as shown.
Put on the harness and
hang the machine in the
suspension hook. Now
finely adjust so that the
machine gives a
comfortable working
position when its attached
to the harness. Tighten the
handle.
The handlebars can easily
be turned to fit along the
shaft for easy
transportation and storage.
Loosen the knob. Turn the
handles clockwise so that
the throttle comes against
the engine.
Thereafter fold the
handlebars around the
shaft. Tighten the handle.
Attach the transport
guard.
Transport position, handlebars
Remove the screw at the
rear of the throttle
handle.
Slide on the throttle
handle on the right-hand
side of the handlebars,
(see the diagram).
Align the hole in the
throttle handle for the
fixing screw with the
hole on the handlebars.
Refit the screw in the
rear of the throttle
handle.
Fit the screw through the
throttle handle and the
handlebars and tighten.
Unscrew the handle
from the handlebar
bracket.
Position the handlebars
as shown. Fit the bracket
components and tighten
the handle lightly.
Put on the harness and
hang the machine in the
suspension hook. Now
finely adjust so that the
machine gives a
comfortable working
position when its
attached to the harness.
Tighten the handle.