Filter
Top Products
English-29
OPERATION
Running
1. Release the parking brake by moving the
lever forward.
Your mower is equipped with an operator
presence system. When the engine is
running, any attempt by the operator to
leave the seat without first setting the
park brake will shut off the engine.
2. Move the steering controls to the neutral
position (N).
3. Select the cutting height by placing the
peg in one of the holes. Lock the peg on
theinsidewiththepin.
4. Press in the stop handle, counter hold,
and carefully move the lifting lever
forward from the transport position
toward the peg.
5. Engage the mower deck by pulling out
the blade switch.
6. Move the throttle control to full throttle.
7. The machine’s speed and direction are
continuously variable using the two
steering controls. When both controls are
in the neutral position, the machine
stands still.
By moving both controls an equal
amount forward or backward, the
machine moves in a straight line forward
or backward respectively.
8011-511
Released parking brake
8011-561
Cutting height selection
IMPORTANT INFORMATION
The mower deck’s anti-scalp rollers should
be evenly adjusted.
WARNING!
Ensure that no one is near the
machine when engaging the
Blade switch.
8011-510
E
ngaging the mower deck