Filter
Top Products
English-15
CONTROLS
Controls
This operator’s manual describes the
Husqvarna Zero Turn Rider. The rider is fitted
with a Kawasaki or Kohler four-stroke
V-Twin engine developing 23-27 horse power.
Transmission from the engine is made via two
belt-driven hydraulic pumps, which in turn
drive a hydraulic motor for each drive wheel.
Using the left and right steering controls, the
flow is regulated and thereby the direction
and speed.
Control Locations
Page Page
1. Motion control, levers 16 8. Seat locking device 19
2. Hour meter 17 9. Fuel tank cap 19
3. Tracking knob 17 10. Fuel shut off valve 20
4. Parking brake 17 11. Seat adjustment lever 20
5. Blade-switch 18 12. Choke control 20
6. Ignition switch 18 13. Throttle control 21
7. Fuses 18 14. Cutting height adjuster 21
8011-464
Zero Turn Rider
8011-767
Locations of the controls