Filter
Top Products
English-28
OPERATION
10. When the engine starts, immediately
release the ignition key back to the run
position.
11. Press the choke control in gradually
when the engine has started.
12. Set the desired engine speed with the
throttle.
Allow the engine to run at a moderate
speed, ”half throttle”, for 3-5 minutes
before loading it too heavily.
USE FULL THROTTLE WHEN
MOWING.
8011-743
Return to run position
IMPORTANT INFORMATION
Do not run the starter for more than
5 seconds each time. If the engine does
not start, wait about 10 seconds before
re-trying.
8011-508
Gradually press in the choke control
8011-509
Set the engine speed
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reporductive system
damage. The engine exhaust
contains carbon monoxide,
which is a odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.