Filter
Top Products
English-35English-35
OPERATION
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than “OFF” will cause the battery
to be discharged and the hour meter to
accumulate hours.
8011-510
Disengaging the mower deck
8011-753
Raise the mower deck
Stopping the Engine
Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
1. Disengage the mower deck by depressing the
blade switch.
2. Raise the mower deck by pulling the lifting
lever backward to the transport position.
3. When the machine is standing still, activate the
parking brake by pulling the lever backward.
4. Move the throttle to the minimum position
(tortoise symbol). Turn the ignition key to the
stop position. Never use the choke to stop the
engine.
5. Move the steering controls outward.
6. Remove the key when leaving the mower to
prevent unauthorized use.
WARNING!
No adjustments or maintenance
to be carried out unless:
the engine stopped•
the ignition key removed•
the parking brake activated•
8011-507
Vent screws on the hydraulic pump
Moving by Hand
When pushing or pulling the mower with the engine
turned off,the vent screws on both hydraulic pumps
must be opened ¼ - ½ turn.