Husqvarna LTH125 Lawn Mower User Manual


 
8
ASSEMBLY
NEGATIVE (-) TERMINAL
NEGATIVE
(BLACK) CABLE
POSITIVE
(RED) CABLE
HEX NUT
FLAT
WASHER
HEX
BOLT
POSITIVE (+) TERMINAL
BATTERY
BOX DOOR
LOCK
WASHER
FIG. 4
INSTALL BATTERY (See Figs. 4 & 5)
CAUTION: Do not short battery termi-
nals. Before installing battery, remove
metal bracelets, wristwatch bands,
rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding.
Lift seat to raised position.
Open battery box door.
Be sure battery drain tube is attached to battery box.
Lower battery into battery box with battery terminals
toward front of tractor.
First connect RED battery cable to positive (+) terminal
with hex bolt, flat washer, lock washer and hex nut as
shown. Tighten securely.
Connect BLACK grounding cable to negative (-) termi-
nal with remaining hex bolt, flat washer, lock washer
and hex nut. Tighten securely.
Close battery box door.
Open battery box door for:
Inspection for secure connections (to tighten hard-
ware).
Inspection for corrosion.
Testing battery.
Jumping (if required).
Periodic charging .
VENT CAPS
BATTERY
BOX DOOR
FIG. 5