Husqvarna LOYTH20F42T Lawn Mower User Manual


 
5
PRODUCT SPECIFICATIONS
Gasoline Capacity 4 Gallons
and Type: Unleaded Regular
Oil Type
SAE 10W30 (above 32°F)
(API-SG-SL): SAE 5W30
(below 32°F)
Oil Capacity: W/ Filter: 2.9 Pints
W/O Filter: 2.2 Pints
Spark Plug: Champion RC12YC
(Gap: .030")
Ground Speed Forward: 0-5.8
Reverse: 0-2.1
Charging
System:
15 Amps @ 3600 RPM
Battery: Amp/Hr: 35
Min. CCA: 280
Case size: U1R
Blade Bolt Torque: 45-55 Ft. Lbs.
CUSTOMER RESPONSIBILITIES
• Read and observe the safety rules.
• Follow a regular schedule in main-
tain ing, caring for and using your tractor.
• Follow the instructions under “Main te -
nance” and “Stor age” sec tions of this
own er’s manual.
WARNING: This tractor is equipped
with an internal com bus tion engine and
should not be used on or near any un im -
proved forest-covered, brush-covered or
grass-cov ered land unless the engine’s
exhaust system is equipped with a spark
arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it
should be maintained in effective working
order by the operator.
In the state of California the above is
required by law (Section 4442 of the
California Public Resources Code). Other
states may have similar laws. Federal
laws apply on federal lands. A spark ar-
rester for the muffl er is available through
your nearest service center (See RE PAIR
PARTS manual).
CONGRATULATIONS on your purchase
of a new tractor. It has been designed,
engineered and manu fac tured to give
you the best possible dependability and
performance.
Should you experience any problem you
cannot easily remedy, please contact a
qualifi ed service center. We have com-
pe tent, well-trained tech ni cians and the
proper tools to ser vice or repair this trac-
tor.
Please read and retain this manual. The
instructions will enable you to assemble
and maintain your tractor prop erly. Always
observe the “SAFETY RULES”.
TABLE OF CONTENTS
Safety Rules .......................................... 2
Product Specifi cations........................... 5
Assembly/Pre-Operation ....................... 6
Operation............................................... 8
Maintenance Schedule........................ 16
Maintenance........................................ 16
Service and Adjustments..................... 20
Storage................................................ 27
Troubleshooting ................................... 28
Warranty .............................................. 31