Filter
Top Products
English-50
MAINTENANCE
To adjust anti-scalp rollers
Anti-scalp rollers are properly adjusted when
they are just slightly off of the ground when
the deck is at the desired cutting height in the
operating position. Anti-scalp rollers then
keep the deck in the proper position to help
prevent scalping in most terrain conditions.
Tunnel Deck -
The anti-scalp rollers can be set in three
positions.
¥ Upper position 1.5 to 3 (38 to 76 mm)
grass.
¥ Middle position 3 to 4.5 (76 to 114 mm)
grass.
¥ Lower position 4.5 to 6 (114 to 152 mm)
grass.
Combi Deck -
The anti-scalp rollers can be set in two
postions.
¥ Upper position 1.5 to 3 (38 to 76mm)
grass.
¥ Lower position 3 to 5 (38 to 127mm)
grass.
The rollers should be approximately 1/4
(6.5 mm) from ground.
CZ-9
Anti-scalp roller - Tunnel Decks
IMPORTANT INFORMATION
Adjust Anti-scalp rollers with the
mower on a flat level surface.
CZ-9
Anti-scalp roller - Combi Decks
IMPORTANT INFORMATION
The anti-scalp rollers must not be used for
gauge wheels or the roller and deck may
be damaged.