Filter
Top Products
English-13
SAFETY INSTRUCTIONS
• Stop and inspect the equipment if you
run over or into anything. If necessary,
make repairs before starting.
• Never make adjustments with the engine
running.
• The machine is tested and approved only
with the equipment originally provided or
recommended by the manufacturer.
• The blades are sharp and can cause
cuts and gashes. Wrap the blades or use
protective gloves when handling them.
• Check the parking brake’s functionality
regularly. Adjust and service as
necessary.
• The mulch blades should only be used in
familiar areas when higher quality
mowing is desired .
• Reduce the risk of fire by removing
grass, leaves, and other debris that may
have accumulated on the machine. Allow
the machine to cool before putting it in
storage.
• If a hydraulic leak is suspected, use a
piece of cardboard or wood, NOT your
hands to check for leaks.
Transport
• The machine is heavy and can cause
serious crushing injuries. Be extra
cautious when it is loaded on or
unloaded from a vehicle or trailer.
• Use an approved trailer to transport the
machine. Activate the parking brake, turn
off the fuel supply, and fasten the
machine with approved fastening
devices, such as bands, chains, or
ropes, when transporting.
• Check and abide by local traffic
regulations before transporting or driving
the machine on any road.
• Do not tow this machine, it may cause
damage to the drive system.
• Do not tow any trailers, etc with this
mower. They may jackknife or overturn
causing damage to the mower and
possibly serious injury to the operator.
Use protective glasses for
maintenance work.
8011-644
Clean the machine regularly
WARNING!
Escaping hydraulic oil under
pressure can have sufficient
force to penetrate the skin,
causing serious injury. If injured
by escaping fluid, see a doctor
at once. Serious infection or
reaction can develop if proper
medical treatment is not
administered immdediately.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock
the machine in place during transport.
Ensure that the machine is well fastened
to the transport vehicle. Always reverse
the machine onto the transport vehicle to
avoid tipping it over.