Filter
Top Products
Vehicle Specifications
Page 38 2007 HUV4213 Gasoline Vehicle Owner’s Manual
VEHICLE SPECIFICATIONS
SPECIFICATIONS
HUV4213-GXP HUV4213-G
POWER SOURCE
Engine: 4-cycle OHV, 400 cc, 13.0 maximum HP @3600 rpm (per SAE J 1940/1349), single-
cylinder, air-cooled, with pressure lubrication system
•
Fuel system: Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse fuel pump •
Governor: Automatic ground-speed sensing, internally geared in unitized transaxle •
Ignition: Transistor electronic ignition with electronic RPM limiter •
Unitized transaxle, MC012C-BS00: Fully synchronized forward and reverse with neutral
(14.9:1 forward, 20.5:1 reverse) and differential lock feature
•
Electrical system: 12-volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute reserve
capacity and 35-amp charging capacity
•
Torque converter: Automatic, variable-speed, dry type •
STEERING/SUSPENSION/BRAKES
Steering: Self-adjusting rack and pinion, Ackerman •
Suspension:
Front: Independent A-arms with coil-over shocks
Rear: Semi-independent suspension with multi-leaf springs and dual hydraulic shocks
•
Brakes: Hydraulic brake system – self-adjusting drum brakes on each wheel with separate
hand-operated park brake
•
BODY/CHASSIS
Frame/Chassis: Twin I-Beam welded aluminum •
Side and rear body: All aluminum •
Cargo bed: Powder-coated steel •
Front body: ABS/DR acrylic cap •
Tires: 23 x 10.50 – 12 tubeless, 4-ply rated load range, front and rear •
DIMENSIONS/WEIGHT
Overall length (box bed configuration) 123.4 in. (313.4 cm)
Overall width 54 in. (137 cm)
Overall height (at lamp bar) 75 in. (187.5 cm)
Wheelbase 80 in. (203 cm)
Ground clearance:
under differential
under foot platform
6.6 in. (17 cm)
11.4 in. (29 cm)
Front wheel tread 43 in. (109 cm)
Rear wheel tread 44.5 in. (111 cm)
Weight (dry):
with all-terrain tread
with turf tread
1106 lb. (493.4 kg)
1066 lb. (477.2 kg)
1063.5 lb. (482.4 kg)
1027.8 lb. (466.2 kg)
Forward speed 17-19 mph (27-31 km/h)
Governed RPM: FE400 Engine 3850 (±30) RPM
Curb clearance circle (diameter) 24 ft. 1 in. (734 cm)
Turning radius (per SAE J 695) 139.6 in. (355 cm)
Intersecting aisle clearance 112.2 in (285 cm)
Floorboard height 17 in. (43 cm)
Specifications continued on next page...