Filter
Top Products
4
TABLE OF CONTENTS
KNOW YOUR LAWN MOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER.
Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand
their meaning.
Setup
LOOSE PARTS
Use the chart below to verify that all parts have been
shipped.
Description Qty.
Handle Bolt
Handle Knob
Washout Adapter
Grass Bag
Grass Bag Frame
2
2
1
1
1
ASSEMBLY
Read these instructions and this man u al in its entirety before you attempt to assemble or operate your new lawn mow er.
IMPORTANT: THIS LAWN MOWER IS SHIPPED WITH OUT OIL OR GASOLINE IN THE ENGINE.
Your new lawn mower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for shipping
purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts
bag. To ensure safe and proper operation of your lawn mow er, all parts and hard ware you assemble must be tightened
se cure ly. Use the correct tools as nec es sary to ensure proper tightness.
OPERATION ............................................................ 7-12
MAINTENANCE ..................................................... 13-17
SERVICE AND ADJUSTMENTS ........................... 18-19
STORAGE .............................................................. 20-21
TROUBLESHOOTING ................................................ 22
WARRANTY ........................................................... 23-25
SAFETY RULES ........................................................ 2-3
PRODUCT SPECIFICATIONS ...................................... 3
CUSTOMER RESPONSIBILITIES ................................ 3
SAFETY AND INSTRUCTIONAL DECALS ................. 4
ASSEMBLY ................................................................ 4-5
PRODUCT OVERVIEW ................................................ 6
TO ASSEMBLE GRASS CATCHER
1. Put grass catcher frame into grass bag with rigid part
of bag on the bottom. Make sure the frame handle is
outside of the bag top (Figure 2).
2. Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm water
for a few minutes. If bag gets wet, let it dry before using.
1. Vinyl bindings
2. Frame handle
3. Frame opening
Figure 2
3
1
2