Filter
Top Products
English – 11
MAINTENANCE
Weekly
maintenance
1. Fill the gearbox with
grease. This should be
carried out after approxi-
mately every 20 working
hours.
2. Check that the bolts
keeping the blades
together are tightened.
Maintenance schedule
Below follows some general maintenance instructions.
If you need further information please contact your service
workshop.
Daily maintenance
1. Check that the blades do
not rotate while idling or
when the choke is in the
start position.
2. Check that the hand
guard is not damaged.
Replace the guard if
damaged.
1
2
1
2
A
B
Technical data
Weight
Weight without fuel, Lbs/kg
Blades
Length, mm
Blade speed, Cut/min
TECHNICAL DATA
2,0
550
4184