Filter
Top Products
5
DRAWBAR A (See Figs. 1A, 1B & 1C)
1. Remove and discard the upper bolt on both sides of
the drawbar. Using the same holes, install the shoulder
bolts supplied and tighten securely.
0
2
5
31
DRAWBAR
FIG. 1A
REMOVE AND DISCARD
UPPER BOLTS AND INSTALL
SHOULDER BOLTS SUPPLIED
02530
SHOULDER
BOLTS
SUPPORT
ASSEMBLY
RETAINER
SPRING
FIG. 1C
BAGGER SUPPORT ASSEMBLY
Determine which type drawbar you have on your tractor.
Compare the drawbar illustrations below to the drawbar
located at the rear of your tractor.
Follow the support assembly instructions that apply to your
type drawbar.
2. Align support assembly pin with hole in drawbar and
hang assembly over the shoulder bolts.
3. Be sure support assembly is seated properly and secure
with retainer spring supplied.
FIG. 1B
1
DRAWBAR A
(Vertical Drawbar)
DRAWBAR B
(Sloping Drawbar)
FIG. 1D
02543
INSERT
FLANGES
FIRST INTO
DRAWBAR
SLOTS
SUPPORT
ASSEMBLY
DRAWBAR SLOTS
RETAINER
SPRING
PIN
0
2
0
51
0
2
0
51
0
2
0
5
1
DRAWBAR
PIN HOLE
DRAWBAR B (See Fig. 1D)
1. Slide flanges of support assembly into drawbar slots first,
then, pivot backwards inserting pin into drawbar pin hole.
2. Be sure support assembly is seated properly, then secure
with retainer spring.
ASSEMBLY