12
OPERATION
AMPS
60
0
60
TECH
2851
KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments.
Save this man ual for future reference.
FIG. 7
THROTTLE
CONTROL
CHOKE
CONTROL
AMMETER - Indocates charging (+) or discharging (-) of
battery.
ATTACHMENT CLUTCH SWITCH - Used to engage mow er
blades or other attachments mounted to your trac tor.
BRAKE PEDAL - Used for braking the tractor and starting
the engine.
CHOKE CONTROL - Used when starting a cold engine.
FREEWHEEL CONTROL - Disengages transmission for
pushing or slowly towing the tractor with the engine off.
HEIGHT ADJUSTMENT KNOB - Used to adjust the mow er
height.
HOURMETER - Indicates hours of operation.
IGNITION SWITCH - Used to start and stop the engine.
LIFT LEVER - Used to raise and lower mower deck or
other attachments mounted to your tractor.
LIFT LEVER PLUNGER - Used to release attachment lift
lever when changing its position.
LIGHT SWITCH POSITION - Turns the headlights on
and off.
MOTION CONTROL LEVER- Selects the speed and direc-
tion of tractor.
MOTION DRIVE BELT TENSION HANDLE- Used when
changing motion drive belt and, if necessary, starting engine
under extremely cold conditions.
PARKING BRAKE LEVER - Locks brake pedal into the
brake position.
REVERSE OPERATION SYSTEM (ROS) “ON” POSI-
TION - Allows operation of mower deck or other powered
attachment while in reverse.
THROTTLE CONTROL - Used to control engine speed.
Our tractors conform to the safety standards of the American National Standards Institute.
MOTION
CONTROL
LEVER
PARKING BRAKE
LEVER
HEIGHT
ADJUSTMENT
KNOB
IGNITION SWITCH
BRAKE PEDAL
LIFT LEVER
ATTACHMENT
CLUTCH SWITCH
FREE WHEEL CONTROL
LIFT LEVER
PLUNGER
ROS "ON" POSITION
HOURMETER
AMMETER
MOTION DRIVE
BELT TENSION
HANDLE
LIGHT SWITCH