Filter
Top Products
4
ASSEMBLY
OPERATOR’S POSITION (See Fig. 1)
When right or left hand is mentioned in this manual, it
means when you are in the operating position (standing
behind tiller handles).
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard
wrench sizes are listed.
(1) Utility knife
(1) Screwdriver
(1) Pair of pliers
(2) 1/2" wrenches
Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes.
To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use
the correct tools as necessary to insure proper tightness.
(2) Flange Locknuts
5/16-18 UNC
(2) Lock Washers 5/16
(2) Hex Nuts 5/16-18
(2) Hex Bolts 5/16-18 x 1-1/4
(2) Carriage Bolts 5/16-18 UNC x 2-1/2
CONTENTS OF HARDWARE PACK
(1) Manual
(1) Bottle Engine Oil
OPERATOR'S POSITION
RIGHT
FRONT
LEFT
overhead_views_8
Fig. 1