Filter
Top Products
English – 37
TECHNICAL DATA
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Jonsered BC
2145, CC 2145, FC 2145, FC 2145 S and FC 2145 W
with serial numbers dating from 2009 onwards (the year is clearly
stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN ISO 12100-2:2003, CISPR 12:2005, EN ISO 11806:1997
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered:
SEC/09/2188, 01/164/042, 01/164/043 - BC
2145,
SEC/09/2190, 01/164/041 - FC 2145, SEC/09/2190, 01/164/040 - FC 2145 S, FC 2145 W, SEC/09/2189, 01/164/
042, 01/164/043
- CC 2145.
Huskvarna December 29, 2009
Bo Jonsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
CC 2145
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4
mm
Output shaft thread M12
Grass blade/grass cutter
Multi 255-3 (Ø 255 3 teeth) 537 28 85-02
Multi 275-4 (Ø 275 4 teeth) 537 28 85-02
Multi 300-3 (Ø 300 3 teeth) 537 28 85-02
Saw blade Scarlet 200-22 (Ø 200 22 teeth) 537 31 09-01
Plastic blades
Polytrim Ø 300 mm (Separate blades
have part number 531 01 77-15)
537 28 85-02
Trimmer head
Trimmy S II (Ø 2.4 - 3.3 mm cord) 503 95 43-04
Auto 55 (Ø 2.7 - 3.3 mm cord) 503 95 43-04
Tap-N-Go 45 Spin (Ø 2.7 - 3.3 mm
cord)
503 95 43-04
Support cup
Fixed
With ball bearing
Shredder blade - Set 544 84 29-02