Filter
Top Products
MAINTENANCE
44-Husqvarna
Pump Belt
Replacing pump belt
Park the mower on a level surface. Engage the
parking brake.
Belt removal
Remove the deck belt (see Deck Belt Removal in 1.
this section of the manual).
Create slack in the belt by removing the spring on 2.
the pump idler arm.
The belt should now be able to be removed from 3.
the engine pulley and pump pulleys.
Belt installation
Wrap the belt around the pulley1.
Route the belt around the inside of the idler 2.
pulley.
Wrap the belt around the engine pulley.3.
Reattach the spring on the pump idler arm.4.
Reinstall the deck belt. (see Deck Belt 5.
Installation in this section of the manual).
8054-002
Electric clutch1.
Idler spring2.
Clutch stop3.
Pump belt removal
1
2
3