Filter
Top Products
CONTROLS
English-18
Controls
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with either a Briggs &
Stratton or Kohler four-stroke overhead valve engine
developing 20 - 26 horse power.
Transmission from the engine is made via two belt-
driven hydraulic pumps, which in turn drive a hydraulic
motor for each drive wheel. Using the left and right
steering controls, the flow is regulated and thereby the
direction and speed.
Zero Turn Rider
Control Locations
Page
1. Parking brake.................................................17
2. Motion control levers .......................................16
3. Fuel shut off valve ...........................................18
4. Seat adjustment bolts......................................18
5. Fuel tank cap .................................................19
6. By pass linkage ..............................................19
Page
7. Fuses ............................................................20
8. Hour meter .....................................................21
9. Choke control .................................................21
10. Ignition switch.................................................21
11. Throttle control ...............................................22
12. Blade switch...................................................22
13. Cutting height pedal ........................................23
8011-769-2