Filter
Top Products
MAINTENANCE
Husqvarna-41
Kawasaki Engine
Remove the plastic fastener on the top of 1.
the air lter cowling and remove the air lter
cowling.
Remove the foam rubber pre-lter and clean 2.
using a mild detergent. Squeeze it dry with a
clean cloth.
WARNING!
The engine and the exhaust system
become very hot during operation.
There is a risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes.
8011-557
Remove pre-lter
8011-768
Remove the air lter cowling
8011-558
Remove paper lter
Remove the wing nuts for the air lter and 3.
remove the paper lter.
IMPORTANT INFORMATION
Do not use compressed air to clean the air
lter.
Do not wash the paper lter.
Do not oil the paper lter.