Filter
Top Products
OPERATION
32
Stopping the Engine
Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
1. Disengage the mower deck by depressing the
blade switch.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than OFF will cause the battery to be
discharged.
8052-001
Disengage the mower deck and move throttle to minimum
8058-019
The mower deck’s lifting lever
8061-026
Place controls in neutral position
2. Raise the mower deck by pressing the button on
the lever and pulling backward to the transport
position.
3. When the machine is standing still, activate the
parking brake by pushing the lever button and
pulling the lever upward.
4. Move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
5. Move the steering controls outward.
6. Remove key. Always remove key when leaving the
mower to prevent unauthorized use.