Filter
Top Products
OPERATION
Husqvarna-25
Before Starting
Read the sections Safety Instructions and Controls •
before starting the machine.
Perform the daily maintenance before starting •
(see Maintenance Schedule in the Maintenance
section).
Check that there is sufcient fuel in the fuel tank.•
Adjust the seat to the desired position.•
The following conditions must be fullled before the
engine can be started:
The blade switch for engaging the mower blades •
must be depressed.
The parking brake must be on.•
Both steering controls must be in the locked •
(outer) neutral position.
Starting the Engine
Sit on the seat. •
Raise the mower deck by pushing the release •
button on the top of the lifting lever. Pull the lifting
lever backward to the locked position (transport)
position.
Activate the parking brake by pushing the release •
button in and pulling the lever fully upwards.
Disengage the mower blades by pressing the blade
switch downwards.
8058-019
Set mower deck to transport position
8058-020
Pull parking brake upwards to activate.
8052-001
Depress blade switch
UP
BLADES ON
DOWN
BLADES OFF
CHOKE
FAST
SLOW