Filter
Top Products
English-36
OPERATION
Manual Transport
When pushing or pulling the mower, be sure to engage
the IZT (Integrated Zeroturn Transaxle) bypass
linkages. The IZT bypass linkages are located on the
rear of the frame, below the rear engine guard.
• Always turn off engine before engaging
or disengaging the hydro release. Never
attempt to adjust the bypass linkages with
the engine running.
• Raise the deck into the highest cutting
position.
• Pull the IZT bypass linkages out and into
the slots and release so that it is held in the
bypass position.
• To reengage the IZT’s to drive, reverse the
above procedure.
WARNING!
No adjustments or maintenance
to be carried out unless:
♦ the engine stopped
♦ the ignition key removed
♦ the parking brake activated
1. IZT Bypass linkage
Bypass linkages
CZ10-2
1. Head outside of rear deck
1. IZT Bypass linkage
Bypass linkages
CZ12
English-36
1
2