Filter
Top Products
14
CHECKLIST
PLEASE REVIEW THE FOLLOWING
CHECKLIST
• All assembly instructions have been
completed
• No remaining loose parts in crate
• Seat is adjusted properly and securely
fastened
• All tires are properly inflated
• Check wiring. See that all connections
are still secure, and wires are properly
clamped.
• Before driving the mower, be sure the
IZT(Integraded Zeroturn Transaxle)
bypass linkages are in the drive position.
WHILE LEARNING HOW TO USE
YOUR MOWER, PAY EXTRA
ATTENTION TO THE FOLLOWING
ITEMS:
• Engine oil is at proper level
• Fuel tank is filled with fresh, clean,
regular unleaded gasoline. Check your
engine manual for fuel requirements.
• Become familiar with all controls – their
location and function. Operate them
before you start the engine.
• Become familiar with unit operation on a
flat and level area with the mower deck
shut off.
• Be sure the brake system is in a safe
operating condition. If adjustment is
needed see Service and Adjustment
section.
ASSEMBLY
CHECK THE TIRE PRESSURE
Correct tire pressure is important for best
cutting performance.
• Check the tire pressure and adjust
accordingly. Refer to the “SPECIFICA-
TIONS” section in this manual.