Filter
Top Products
2 –
English
KEY TO SYMBOLS
Symbols
WARNING! The machine can be a dangerous
tool if used incorrectly or carelessly, which can
cause serious or fatal injury to the operator or
others.
Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with applicable
EC directives.
Warning: rotating cutter. Keep hands and feet
clear.
Warning: the cutter continues to rotate even
after the engine has stopped.
When the engine has stopped, stop the
cutter from rotating by lowering the cutter
onto the ground. The arrow indicates the
direction of rotation.
The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 metres.
Arrows which show limits for the position
of the guard.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
50FT
15 m
50F
T
15 m