Filter
Top Products
CONTROLS
English-23
Hour meter
8011-759
Ignition switch
8011-756
IMPORTANT INFORMATION
Do not run the starter for more than ve
seconds each time. If the engine does
not start, wait about 10 seconds before
retrying.
Choke control
8011-758
1. IZT Bypass linkage
Hour Meter
The hour meter displays the total operating time.
It will ash CHG OIL (Change Oil) at 50 hour intervals.
The ash duration is one hour before and one hour
after the interval. The CHG OIL icon will come on
and shut off automatically. The hour meter can not be
manually reset.
Choke Control
The choke control is used for cold starts in order to
provide the engine with a richer fuel mixture.
For cold starts the control should be pulled out.
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine.