Filter
Top Products
EC Declaration of Conformity
Husqvarna UK Ltd., Aycliffe Industrial Park
Newton Aycliffe, Co. Durham, DL5 6UP, England
Declare under our sole responsibility that the product(s);
Category............................Petrol Lawnmower
Type(s) ...........................540, 540D
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC (until 31.12.09), 2006/42/EC (from 01.01.10), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN 836, EN ISO 14982, EN ISO 20643, EN ISO 3744, EN ISO 11201
The maximum A weighted sound pressure level L
pA
at the operator’s position, recorded on a sample of the above product(s) cor-
responds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s)
corresponds to the Value given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Newton Aycliffe 12/12/2008
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
ENVIRONMENTAL INFORMATION
Husqvarna UK Ltd. are manufactured under an
Environmental Management System (ISO 14001) using,
where practical, components manufactured in the most
environmentally responsible manner, according to
company procedures, and with the potential for recycling
at the end of the products’ life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal
information.
DISPOSAL OF FUELS AND LUBRICATING OILS
• Wear protective clothing when handling any fuels and
lubricants.
• Avoid contact with skin.
• Remove petrol and engine oil before transporting the
product.
• Contact your local authority for information of your
nearest Recycling/Disposal Station.
Do NOT dispose of used fuels/oils with
household waste
Waste fuels/oils are harmful, but can be
recycled and should be disposed of through
the recognised facilities.
Do NOT dispose of used fuels/oils to water.
Do NOT incinerate
Environmental Information
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Measured Sound Power L
WA
(dB(A))
Guaranteed Sound Power L
WA
(dB(A))
Level (dB(A))
Value (m/s
2
)
Weight (Kg)
540D
40
3000
95
96
81
5
23
540
40
3000
95
96
81
5
21
Husqvarna UK LTD.
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - 01325 302302 Fax - 01325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
5229601-01