Filter
Top Products
TECHNICAL DATA
English – 23
1151387-49 Rev.2 2009-06-10
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved
cutting equipment fitted. The table indicates the highest and lowest values.
224L
Engine
Cylinder displacement, cu.in/cm
3
1,53/25,0
Cylinder bore, inch/mm 1,38/35
Stroke, inch/mm 1,03/26
Idle speed, rpm 3100
Recommended max. speed, rpm 12000
Speed of output shaft, rpm 8220
Max. engine output, acc. to ISO 8893, kW/ rpm 0,8 / 7000
Catalytic converter muffler No
Speed-regulated ignition system No
Ignition system
Manufacturer/type of ignition system Ikeda
Spark plug NGK CMR5H
Electrode gap, inch/mm 0,024/0,6
Fuel and lubrication system
Manufacturer/type of carburetor Walbro
Fuel tank capacity, US pint/litre 1,16/0,55
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 11,0/5,0
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured
according to ANSI B175.3-2003, dB(A), min/max:
90/97
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-2003, m/s
2
At idle, left/right handles, min.: 1,9/1,8
At idle, left/right handles, max.: 2,2/1,9
At max. speed, left/right handles, min.: 4,8/11,3
At max. speed, left/right handles, max.: 8,9/14,0
224L
Approved accessories Type Cutting attachment guard, Art. no.
Arbor shaft thread M10
Plastic blades
Tricut Ø 255 mm 503 93 42-02 / 503 97 71-01
Tricut Ø 300 mm 503 93 42-02
Trimmer head
S35 503 93 42-02 / 503 97 71-01
T25 503 93 42-02 / 503 97 71-01
T35 503 93 42-02 / 503 97 71-01
Trimmy Fix 503 93 42-02 / 503 97 71-01
Superauto II 503 93 42-02 / 503 97 71-01