Filter
Top Products
8
OPERATION
TO EMPTY GRASS CATCHER (See Fig. 10)
1. Lift up on grass catcher using the frame han dle.
2. Remove grass catcher with clippings from under lawn
mower han dle.
3. Empty clippings from bag.
NOTE: Do not drag the bag when emptying; it will cause
unnecessary wear.
TO CONVERT MOWER
Your lawn mower was shipped ready to be used as a
mulcher. To convert to bagging or discharging:
REAR BAGGING (See Fig. 11)
• Open rear door and remove mulcher plug. Store
mulcher plug in a safe place.
• You can now install the grass catcher.
• To convert to mulching or discharging operation, install
mulcher plug into rear discharge opening of mower.
FIG. 11
MULCHER PLUG
FIG. 10
FRAME
HANDLE
FIG. 12
OPEN
MULCHER
DOOR
DISCHARGE
DEFLECTOR
SIDE DIS CHARG ING (See Fig. 12)
• Mulcher plug must be installed into rear discharge
open ing of mower.
• Open mulcher door and install discharge deflector
un der door as shown.
• Mower is now ready for discharging operation.
• To convert to mulching or bagging operation, dis-
charge deflector must be removed and mulcher door
closed.