Filter
Top Products
7
OPERATION
TO EMPTY GRASS CATCHER (See Fig. 6)
1. Lift up on grass catcher using the frame han dle.
2. Remove grass catcher with clippings from under lawn
mower han dle.
3. Empty clippings from bag.
NOTE: Do not drag the bag when emptying; it will cause
unnecessary wear.
BEFORE STARTING ENGINE
ADD OIL (See Fig. 7)
Your lawnmower is shipped without oil in the engine. For
type and grade of oil to use, see “EN GINE” in the Mainte-
nance section of this manual.
CAUTION: DO NOT overfi ll engine with
oil, or it will smoke on startup.
1. Be sure lawnmower is level.
2. Remove oil dipstick from oil fi ll spout.
3. You receive a container of oil with the unit. Slowly
pour the entire container down the oil fi ll spout into the
engine.
NOTE: Initial oil fi ll requires only 18 oz. due to residual oil
in engine from the manufacturers 100% quality testing.
When changing oil you may need 20 oz.
4. Insert and tighten dipstick.
IMPORTANT:
• Check oil level before each use. Add oil if needed. Fill
to full line on dipstick.
FIG. 6
FRAME
HANDLE
FIG. 5
OPEN
MULCHER DOOR
INSTALL
DISCHARGE
DEFLECTOR
MOWER IS NOW READY FOR
DISCHARGING OPERATION
ENGINE
OIL CAP
GASOLINE
FILLER
CAP
FIG. 7
PRIMER