Husqvarna 570 EPA II Chainsaw User Manual


 
English – 39
TECHNICAL DATA
Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for Husqvarna chain saw models 576XP, 576XPG and 570. These
chain saw models equipped with either of the listed bar and sawchain combinations, fulfills the requirements according
to ANSI B 175.1-2000 (Gasoline Powered Chain Saws - Safety Requirements).
Note: ATM (Armour Tip Medium) is a designation for a hard nose bar with nose radius 1,33”.
Saw chain filing and file gauges
Bar Chain
Length, inch Pitch, inch Gauge, inch Max. nose radius Type Drive link count
16 3/8 0,058
11T
Husqvarna H42,
Husqvarna H48
60
18 3/8 0,058 68
20 3/8 0,058 72
24 3/8 0,058 84
28 3/8 0,058 92
16 3/8 0,050
Husqvarna H46,
Husqvarna H47,
Husqvarna H47S,
Husqvarna H82
60
18 3/8 0,050 68
20 3/8 0,050 72
24 3/8 0,050 84
28 3/8 0,050 93
32 3/8 0,050 105
!
WARNING! This chain saw is capable of
severe kickback that could result in
serious injury to the user. Do not operate
this chain saw unless you have
extraordinary cutting needs and
experience and specialized training for
dealing with kickback. Chain saws with
significantly reduced kickback potential
are available.