Husqvarna 55C21HV Lawn Mower User Manual


 
8
OPERATION
TO CONVERT MOWER (See Figs. 7 thru 9)
Your lawn mower was shipped ready to be used as a mulcher.
To convert to rear bagging or side discharging:
REAR BAGGING
Remove knob securing mulcher door to mower housing.
• Open mulcher door and insert tabs of discharge chute
into hinge bracket opening and position rear of chute
over threaded stud.
FIG. 7
DISCHARGE CHUTE TABS
HINGE BRACKET MULCHER DOOR
• Secure rear of discharge chute to lawn mower housing
with knob.
Place rear handle of grass catcher on the crossbar of
the lawn mower's lower handle as shown.
• Lift the round door of the discharge chute and place
the grass catcher into place on the discharge chute.
NOTE: Be sure round door of discharge chute rests on
grass catcher as shown.
Mower is now ready for rear bagging operation.
To convert to mulching operation, remove grass catch er
and discharge chute. Secure mulcher door to mower
housing with knob.
To convert to side dis charg ing operation, remove grass
catch er and discharge chute. Install side discharge
defl ector and secure it to mower housing with knob.
SIDE DISCHARGING
Grass catcher and discharge chute must be re-
moved.
Open mulcher door and install front of side dis charge
defl ector beneath it as shown.
• Secure rear of side discharge defl ector to lawn mower
housing with knob.
Mower is now ready for side discharging operation.
• To convert to mulching operation, side dis charge de-
fl ector must be removed and mulcher door secured to
mower housing with knob.
• To convert to rear bagging operation, side discharge
defl ector must be removed; discharge chute and grass
catcher installed and discharge chute secured to mower
housing with knob.
FIG. 8
DISCHARGE
CHUTE
ROUND
DOOR
GRASS
CATCHER
CROSSBAR
MULCHER
DOOR
KNOB
REAR HANDLE
THREADED
STUD
FIG. 9
SIDE
DISCHARGE
DEFLECTOR
KNOBMULCHER
DOOR
THREADED
STUD