Husqvarna 536LiHD70X Trimmer User Manual


 
WORKING TECHNIQUES
English 17
Always use both hands to hold the machine. Hold the
machine at the side of your body.
Make sure that no clothes or parts of the body come
in contact with the cutting equipment when it is
activated.
When the motor is switched off, keep your hands and
feet away from the cutting attachment until it has
stopped completely.
Watch out for stumps of branches that can be thrown
out during cutting. Do not cut too close to the ground.
Stones and other objects can be thrown out.
Check the working area for foreign objects such as
electricity cables, insects and animals, etc, or other
objects that could damage the cutting attachment,
such as metal items.
If anything jams in the blades while you are working,
switch off the motor and wait until it has stopped
completely before cleaning the blades. Remove the
battery from the machine.
Never leave the machine unsupervised with the motor
running.
Safety instructions after completing work
The transport guard should always be tted to the
cutting attachment when the machine is not in use.
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Remove the battery from the machine.
Always wear heavy-duty gloves when repairing the
cutting attachment. The blades are very sharp and
can easily cause cuts.
Store the machine out of reach of children.
Use only original spare parts for repairs.
Basic working techniques
Work with a swinging action from the bottom upwards
when trimming sides.
When trimming a hedge the motor should always face
away from the hedge.
Hold the machine as close to your body as possible to
get the best balance.
Make sure that the tip does not touch the ground.
Li-ion
Li-ion