Husqvarna 532 43 00-03 Lawn Mower User Manual


 
19
SERVICE AND ADJUSTMENTS
C
D
ATTACH MOWER SIDE SUSPENSION ARMS (A) TO
CHASSIS - Position hole in arm over pin (B) on outside
of tractor chassis and secure with washer and retainer
spring.
Repeat on opposite side of tractor.
FIG. 24
FIG. 25
NOTE: Be sure mower side suspension arms (A) are pointing
forward before sliding mower under tractor.
Slide mower under tractor until it is centered under
tractor.
FIRST INSTALL ANTI-SWAY BAR (S).
- From right side of mower, insert anti-sway bar into
hole in transmission bracket (T).
02995
S
T
A
FIG. 22
- Pivot bar towards you and insert other end of bar
into hole in rear mower bracket (D). Move mower
as needed to insert bar.
- Secure with washer and retainer spring as shown.
FIG. 23
A
B
FIG. 20
FIG. 21
02965
02965
0
20
51
A
D
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
Repeat on opposite side of tractor.
Turn steering wheel to position wheels straight for-
ward.