Filter
Top Products
Before starting your Hedgetrimmer.
1. Remove blade cover (D).
To start your Hedgetrimmer
1. There are two switch levers fitted to your
Hedgetrimmer.
2. Both switch levers need to be held in the
operating position (See Fig E) for the
product to start.
To stop your Hedgetrimmer
• Move Hedgetrimmer away from cutting
area before stopping.
1. To stop, release one
of the switch
levers.(Fig F)
Starting and Stopping
D
E
F
How to Use
How to Use your Hedgetrimmer
1.Inspect area to be cut before each use -
remove objects which can be thrown or
become entangled in the cutting blades.
2. Always keep the Hedgetrimmer in front of your
body. Hold handle firmly with both hands and
stand in a secure and stable position.
3.Allow the cutting blades to reach full speed
before entering the material to be cut.
4.Always work going away from people and
solid objects such as walls, large stones,
trees, vehicles etc.
5. If blade stalls, immediately stop the
Hedgetrimmer and clear jammed debris from
the cutting blades. Inspect blades and repair
or replace as needed.
Top Cutting
Use a wide sweeping motion. (G) A slight down-
ward tilt of the cutting blades in the direction of
motion gives the best cutting results.
Side Cutting
When trimming the sides of the hedge, begin at the
bottom and cut upwards (H), tapering the hedge
inward at the top. This shape will expose more of
the hedge, resulting in more uniformed growth.
G
H