Filter
Top Products
English – 35
Bar and chain combinations
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max.
inches inches tip radius
365/ 15 3/8 11T Husqvarna H42
371XP 16 3/8 11T Husqvarna H42
18 3/8 11T Husqvarna H42
20 3/8 11T Husqvarna H42
24 3/8 11T Husqvarna H42
28 3/8 11T Husqvarna H42
362XP 13 0,325 10T Husqvarna H25
15 0,325 10T Husqvarna H25
16 0,325 10T Husqvarna H25
18 0,325 10T Husqvarna H25
20 0,325 12T Husqvarna H25
15 3/8 11T Husqvarna H42 & Oregon 73L
16 3/8 11T Husqvarna H42 & Oregon 73L
18 3/8 11T Husqvarna H42 & Oregon 73L
20 3/8 11T Husqvarna H42 & Oregon 73L
24 3/8 11T Husqvarna H42 & Oregon 73L
TECHNICAL DATA
L
1
5
EU declaration of conformity (Only applies to Europe)
(Directive 89/392/EEC, Annex II, A)
We, Husqvarna AB, S-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare under sole responsibility that the chain saws
Husqvarna 362XP/XPG, 365 and 371XP/XPG, from 1998’s serial numbers and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), are in conformity with the following standards or other normative documents
following the provisions in the COUNCIL’S DIRECTIVES:
- of June 14 1989 “relating to machinery” 89/392/EEC, and applicable supplements.
- of May 3 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
The following harmonised standards have been applied: EN292-2, EN608.
The supplied chain saw conforms with the example that underwent EU type approval.
Registered body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, S-754 50 Uppsala, Sweden, has carried out EU
type approval in accordance with article 8 section 2c. The EU type approval certificates in accordance with Annex VI, are
numbered: 404/98/617 – 362XP/XPG, 404/96/376 – 365, 404/96/320 – 371XP/XPG.
Huskvarna August 18, 1998
Bo Andréasson, Development manager
Type Inch Inch/mm Inch/mm Degree Degree Degree Inch/mm Inch/cm: dl
H42 3/8" 0,058"/1,5 7/32" /5,5 60° 25° 10° 0,025"/0,65 15"/38:56 16"/40:60
18"/45:68 20"/50:72
24"/60:84
H25 0,325" 0,058"/1,5 3/16" /4,8 85° 30° 10° 0,025"/0,65 13"/33:56 15"/38:64
16"/40:66 18"/45:72
20"/50:78
73L 3/8" 0,058"/1,5 3/16" /4,8 60° 25° 0° 0,020"/0,5 15"/38:56 16"/40:60
18"/45:68 20"/50:72
24"/60:84