Filter
Top Products
English – 35
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
362XP 365 372XP
Engine
Cylinder displacement, cm
3
62,4 65,1 70,7
Cylinder bore, mm 47 48 50
Stroke, mm 36 36 36
Idle speed, rpm 2700 2700 2700
Recommended max. speed, rpm 13500 12500 13500
Power, kW/ rpm (Europe) 3,4/9600 3,4/9300 3,9/9600
Power, kW/ rpm (Australia) 3,4/9600 3,4/9300 3,9/9600
Ignition system
Manufacturer of ignition system SEM SEM SEM
Type of ignition system CD CD CD
Spark plug
NGK BPMR 7A
Champion RCJ 7Y
NGK BPMR 7A
Champion RCJ 7Y
NGK BPMR 7A
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Manufacturer of carburettor Walbro Zama Walbro
Carburettor type HD12B C3M-EL2C HD12B
Fuel tank capacity, litre 0,77 0,77 0,77
Oil pump capacity at 8,500 rpm, ml/min 4–20 4–20 4–20
Oil tank capacity, litre 0,42 0,42 0,42
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 6,0 6,0 6,1
XPG: 6,2 XPG: 6,3
Noise emissions (see note 1)
Sound power level, measured dB(A) 112 111 114
Sound power level, guaranteed L
WA
dB(A) 114 114 115
Noise levels (see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
Europe: 102 102,5 103
Australia: 104,5 104,5 104,5
Vibration levels (see note 3)
Front handle, m/s
2
3,5 3,6 3,5
Rear handle, m/s
2
4,7 3,5 4,0
Chain/bar
Standard bar length, inch/cm 15”/38 15”/38 15”/38
Recommended bar lengths, inch/cm 13-24"/33-60 15-28”/38-70 15-28”/38-70
Usable cutting length, inch/cm 12-23"/31-58 14-27"/35-69 14-27"/35-69
Chain speed at max. power, m/sec 21,4 20,7 21,4
Pitch, inch/mm 0,325/8,25 3/8" /9,52 3/8" /9,52
3/8" /9,52
Thickness of drive links, inch/mm 0,058/1,5 0,058/1,5 0,058/1,5
Number of teeth on drive sprocket 7 7 7