Filter
Top Products
5052848-03
Husqvarna UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where practi-
cal, components manufactured in the most environmentally responsible manner, according to company procedures,
and with the potential for recycling at the end of the products’ life.
• Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environ-
ment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council office, your household
waste disposal service or the shop where you purchased the product.
Environmental Information
EC Declaration of Conformity
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation............................Lawnmower
Designation of Type(s)...........GM340, GM360, GM380
Identification of Series............See Product Rating Label
Year of Construction...............See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
pA
at the operator’s position, measured according to EN60335-2-77 is given in
the table.
The maximum hand / arm vibration weighted value a
h
measured according to EN ISO 20643 on a sample of the above prod-
uct(s) is given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Newton Aycliffe 8/03/2012
M.Bowden
Global R & D Director - Walk behind
Keeper of technical documentation
Ty pe
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Power (kW)
Measured Sound Power L
WA
(dB(A))
Guaranteed Sound Power L
WA
(dB(A))
Sound pressure L
pA
(dB(A))
Uncertainty K
pA
(dB(A))
Hand / arm vibration a
h
(m/s
2
)
Uncertainty K
ah
(m/s
2
)
Weight (Kg)
GM380
38
4200
1.75
91
92
79
2.5
2.75
1.5
11.55
GM340
34
4200
1.55
90
92
79
2.5
1.86
1.5
11.45
GM360
36
4200
1.65
90
92
79
2.5
1.86
1.5
11.45
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2012 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
of Flymo S.A.
Husqvarna AB.
S-561 82
Huskvarna
Sweden
Replacement Parts
Blade
340 Reference no.: FLY 065
360 Reference no.: FLY 063
380 Reference no.: FLY 064
Part no.: 575338790
Part no.: 521949990
Part no.: 522022990