Husqvarna 356BF X-series Blower User Manual


 
English7
SAFETY INSTRUCTIONS
Muffler
Never use a machine that has a faulty muffler.
Regularly check that the muffler is securely attached to
the machine.
The muffler on your machine is equipped with a spark
arrestor screen; this must be cleaned regularly. See the
heading Muffler in the Maintenance chapter. A blocked
screen will cause the engine to overheat and may lead to
serious damage.
Never use a muffler with a defective spark arrestor
screen.
General safety precautions
General
Never use the machine if you are tired, if you have drunk
alcohol, or if you are taking medication that could affect
your vision, your judgement or your co-ordination.
Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
Never use a machine that has been modified in any way
from its original specification.
Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures must
be carried out by trained and qualified specialists. See
instructions under the heading Maintenance.
All covers and guards must be fitted before starting.
Ensure that the spark plug cap and ignition lead are
undamaged to avoid the risk of electric shock.
The blower operator must make sure that no bystanders
or animals come nearer than 15 metres. Whenever
several operators are working in the same work area, they
should maintain a safe distance of at least 15 metres from
one another.
Starting
Never start the machine indoors. Exhaust fumes can be
dangerous if inhaled.
Observe the surroundings and ensure that no people or
animals can come into contact with the blower.
Place the machine on the ground, press the machine
body against the ground with your left hand (NOTE! Not
your foot). Now grasp the starter handle with your right
hand and then pull quickly and firmly.
Fuel safety
Always use a fuel container with an anti-spill valve.
Never refuel the machine while the engine is running.
Always stop the engine and let it cool for a few minutes
before refuelling.
Make sure there is plenty of ventilation when refuelling or
mixing fuel (gasoline and 2-stroke oil).
Avoid all skin contact with fuel. Fuel is a skin irritant and
may even cause skin changes.
Move the machine at least 10 ft (3 m) from the refuelling
point before starting it.
Never start the machine:
- If you have spilled fuel on it. Wipe off the spillage and allow
remaining fuel to evaporate.
- If you have spilled fuel on yourself or your clothes, change
your clothes. Wash any part of your body that has come in
contact with fuel. Use soap and water.
- If the machine is leaking fuel. Check regularly for leaks
from the fuel cap and fuel lines.
!
WARNING! Never use a machine with faulty
safety equipment. The machine’s safety
equipment must be checked and maintained
as described in this section. If your machine
fails any of these checks contact your
service agent to get it repaired.