Filter
Top Products
English – 29
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 333R 335RX
Engine
Cylinder displacement, cu.in/cm
3
2,11/34,6 2,11/34,6
Cylinder bore, inch/mm 1,50/38,0 1,50/38,0
Stroke, inch/mm 1,20/30,5 1,20/30,5
Idle speed, rpm 2900 2900
Recommended max. fast idle speed, rpm 11500 11500
Speed of output shaft, rpm 8220 8220
Max. engine output, acc. to ISO 8893, kW/ rpm 1,6/8400 1,6/8400
Catalytic converter muffler No Ye s
Speed-regulated ignition system Ye s Ye s
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB
Spark plug Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,27/0,6 1,27/0,6
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 13,4/6,1 13,7/6,2
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
96/102 95/102
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 3,0/2,8 2,0/1,9
At idle, left/right handles, max.: 3,2/3,1 2,7/2,3
At max. speed, left/right handles, min.: 2,9/3,4 2,4/1,8
At max. speed, left/right handles, max.: 4,2/5,1 2,7/2,7
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4 mm
Output shaft thread M12
Grass blade/grass cutter
Multi 255-3 (Ø 255 3 teeth) 537 33 16-01
Grass 255-4 (Ø 255 4 teeth) 537 33 16-01
Multi 275-4 (Ø 275 4 teeth) 537 33 16-01
Multi 300-3 (Ø 300 3 teeth) 537 33 16-01
Saw blade Scarlet 200-22 (Ø 200 22 teeth) 537 38 77-01
Plastic blades Tricut Ø 300 mm 537 33 16-01 / 537 34 94-01
Trimmer head
T35 537 33 16-01 / 537 34 94-01
S35 537 33 16-01 / 537 34 94-01
T45 537 33 16-01 / 537 34 94-01
Auto 55 537 33 16-01 / 537 34 94-01
Trimmy S II 537 33 16-01 / 537 34 94-01
Support cup 503 89 01-02 -