Filter
Top Products
22 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 335LS 335Lx
Engine
Cylinder displacement, cu.in/cm
3
2,11/34,6 2,11/34,6
Cylinder bore, inch/mm 1,50/38,0 1,50/38,0
Stroke, inch/mm 1,20/30,5 1,20/30,5
Idle speed, rpm 2900 2900
Recommended max. fast idle speed, rpm 11500 11500
Speed of output shaft, rpm 8220 8220
Max. engine output, acc. to ISO 8893, kW/ rpm 1,6/8400 1,6/8400
Catalytic converter muffler Ye s Ye s
Speed-regulated ignition system Ye s Ye s
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB
Spark plug Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,27/0,6 1,27/0,6
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 12,6/5,7 13,0/5,9
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured
according to ANSI B175.3-2003, dB(A), min/max:
98/100 98/100
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-2003, m/s
2
At idle, left/right handles, min.: 2,4/1,7 2,4/1,7
At idle, left/right handles, max.: 2,4/1,7 2,4/1,7
At max. speed, left/right handles, min.: 3,8/4,2 3,8/4,2
At max. speed, left/right handles, max.: 5,3/5,7 5,3/5,7
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4 mm
Output shaft thread M12
Plastic blades Tricut Ø 300 mm 537 33 16-03
Trimmer head
T35, T35x 537 33 16-03 / 537 34 94-03
S35 537 33 16-03 / 537 34 94-03
T45x 537 33 16-03 / 537 34 94-03
Support cup 503 89 01-02 -
J-handle set including grass blade
Grass 255-4 1” (Ø 255 4-teeth)
- 537 33 16-03