Husqvarna 327HE4 Lopper User Manual


 
WORKING TECHNIQUES
18 – English
Never put the machine down with the engine running
unless you have it in clear sight.
Safety instructions after completing work
The transport guard should always be fitted to the
cutting attachment when the machine is not in use.
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
Always wear heavy-duty gloves when repairing the
cutting attachment. This is extremely sharp and can
easily cause cuts.
Store the machine out of reach of children.
Use only original spare parts for repairs.
Basic working techniques
Work with a swinging action from the bottom upwards
when trimming sides.
Adjust the throttle setting to suit the load.
When trimming a hedge the engine should always
face away from the hedge.
Hold the machine as close to your body as possible to
get the best balance.
Make sure that the tip does not touch the ground.
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
Changing the hedge trimmer angle
(327HE3, 327HE4)
Loosen the knob on the shaft (clockwise).
Press the cutting unit against the hedge or some other
firm surface until the required angle is set.
Turn the knob (anti-clockwise).
(327HDA65)