Husqvarna 326RX-Series Brush Cutter User Manual


 
English – 29
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 326Rx
Engine
Cylinder displacement, cu.in/cm
3
1,50/24,5
Cylinder bore, inch/mm 1,34/34,0
Stroke, inch/mm 1,06/27
Idle speed, rpm 2700
Recommended max. fast idle speed, rpm 11000-11700
Speed of output shaft, rpm 8000
Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/8400
Catalytic converter muffler Ye s
Speed-regulated ignition system Ye s
Ignition system
Manufacturer/type of ignition system
WalbroMB/
SEM AM49
Spark plug Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 10,8/4,9
Sound levels
(see note 1)
Equivalent sound pressure level at the users ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
88/97
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 2,5/2,0
At idle, left/right handles, max.: 3,2/2,7
At max. speed, left/right handles, min.: 2,1/2,4
At max. speed, left/right handles, max.: 4,0/7,0
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4 mm
Arbor shaft thread M10
Grass blade/grass cutter
Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-02
Grass 255-8 1" (Ø 250 8-teeth) 503 93 42-02
Saw blade Scarlet 200-22 1" (Ø 200 22 teeth) 537 02 21-01
Plastic blades Tricut Ø 300 mm 503 93 42-02 / 503 97 71-01
Trimmer head
Trimmy Fix 503 93 42-02 / 503 97 71-01
Superauto II 1" 503 93 42-02 / 503 97 71-01
S35 503 93 42-02 / 503 97 71-01
T35 503 93 42-02 / 503 97 71-01
Support cup Fixed -