![](http://pdfasset.owneriq.net/c/ed/cedcb220-46b6-437e-acae-dc2b5019781f/cedcb220-46b6-437e-acae-dc2b5019781f-bgb.png)
English – 11
ASSEMBLY
Fitting the impact guard
(326HE4)
Fit the guard using the three screws and washers. Fit the two
short screws in hole A. Tighten the screws to a torque of 4
Nm. After the machine has been in use for around 20 hours,
re-tighten the screws to 4 Nm.