Filter
Top Products
2 – English
Symbols
SYMBOL EXPLANATION
WARNING! This machine can be
dangerous. Careless or incorrect use
can result in serious or fatal injury to
the operator or others.
Read through the Operator‘s Manual
carefully and understand the content
before using the machine.
• Use anti-slip and stable boots.
• Always wear approved protective
gloves.
Always use
• A protective helmet where there is
a risk of falling objects
• Ear protection
• Approved eye protection
• This product is in accordance with
applicable CE directives.
• This machine is not electrically
insulated. If the machine touches
or comes close to live electricity
lines, it could cause death or
serious injury. Electricity can
jump from one point to another in
the form of a high-voltage arc.
The higher the voltage, the further
the electricity can jump.
Electricity can also be conducted
by branches and other objects,
especially if they are wet. Always
keep a distance of at least 10 m
(30 ft) between the machine and
live electricity lines and/or objects
that are touching them. If you
have to work closer than this,
always contact the relevant power
company to make sure the power
is switched off before you start
your work.
• This machine has a long reach.
Make sure that no people or
animals come closer than 15 m
(45 ft) when the machine is
running.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Checks and/or maintenance should
be carried out with the engine
switched off, with the stop switch in
the STOP position.
Always wear approved protective
gloves.
Regular cleaning required.
Ocular control.
Approved eye protection must always
be used.
Chain oil and chain oil flow
adjustment