Filter
Top Products
24 – English
TECHNICAL DATA
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 325Lx 325LDx
Engine
Cylinder volume, cu.in/cm
3
1,50/24,5 1,50/24,5
Cylinder bore, inch/mm 1,34/34 1,34/34
Stroke, inch/mm 1,06/27 1,06/27
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 10000-10500
Speed of output shaft, rpm 8014 8014
Max. engine output, acc. to ISO 8893, kW/ r/min 0,9/9000 0,9/9000
Catalytic converter muffler Yes Yes
Speed-regulated ignition system No Yes
Ignition system
Manufacturer/type of ignition system
WalbroMB/SEM
AM49
WalbroMB/SEM
AM49
Spark plug Champion RCJ 7Y Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,0/4,1 9,7/4,4
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
92/98 90/98
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 1,5/1,4 1,5/1,4
At idle, left/right handles, max.: 2,0/1,8 2,4/2,2
At max. speed, left/right handles, min.: 2,5/4,8 2,5/4,8
At max. speed, left/right handles, max.: 4,9/8,0 5,8/7,6